
Microcontroller IC 8-Bit 20MHz 3.5KB (2K x 14) FLASH 18-SOIC PIC16F628A-I/SO
GENERAL DESCRIPTION
The PIC16F627A/628A/648A are 18-pin Flash-based
members of the versatile PIC16F627A/628A/648A
family of low-cost, high-performance, CMOS, fullystatic,
8-bit microcontrollers.
All PIC® microcontrollers employ an advanced RISC
architecture. The PIC16F627A/628A/648A have
enhanced core features, an eight-level deep stack, and
multiple internal and external interrupt sources. The
separate instruction and data buses of the Harvard
architecture allow a 14-bit wide instruction word with
the separate 8-bit wide data. The two-stage instruction
pipeline allows all instructions to execute in a singlecycle,
except for program branches (which require two
cycles). A total of 35 instructions (reduced instruction
set) are available, complemented by a large register
set.
PIC16F627A/628A/648A microcontrollers typically
achieve a 2:1 code compression and a 4:1 speed
improvement over other 8-bit microcontrollers in their
class.
PIC16F627A/628A/648A devices have integrated
features to reduce external components, thus reducing
system cost, enhancing system reliability and reducing
power consumption.
The PIC16F627A/628A/648A has 8 oscillator
configurations. The single-pin RC oscillator provides a
low-cost solution. The LP oscillator minimizes power
consumption, XT is a standard crystal, and INTOSC is
a self-contained precision two-speed internal oscillator.
The HS mode is for High-Speed crystals. The EC mode
is for an external clock source.
The Sleep (Power-down) mode offers power savings.
Users can wake-up the chip from Sleep through several
external interrupts, internal interrupts and Resets.
A highly reliable Watchdog Timer with its own on-chip
RC oscillator provides protection against software lockup.
Table 1-1 shows the features of the PIC16F627A/628A/
648A mid-range microcontroller family.
A simplified block diagram of the PIC16F627A/628A/
648A is shown in Figure 3-1.
The PIC16F627A/628A/648A series fits in applications
ranging from battery chargers to low power remote
sensors. The Flash technology makes customizing
application programs (detection levels, pulse generation,
timers, etc.) extremely fast and convenient. The
small footprint packages makes this microcontroller
series ideal for all applications with space limitations.
Low cost, low power, high performance, ease of use
and I/O flexibility make the PIC16F627A/628A/648A
very versatile.
High-Performance RISC CPU:
• Operating speeds from DC – 20 MHz
• Interrupt capability
• 8-level deep hardware stack
• Direct, Indirect and Relative Addressing modes
• 35 single-word instructions:
- All instructions single cycle except branches
Special Microcontroller Features:
• Internal and external oscillator options:
- Precision internal 4 MHz oscillator factory
calibrated to ±1%
- Low-power internal 48 kHz oscillator
- External Oscillator support for crystals and
resonators
• Power-saving Sleep mode
• Programmable weak pull-ups on PORTB
• Multiplexed Master Clear/Input-pin
• Watchdog Timer with independent oscillator for
reliable operation
• Low-voltage programming
• In-Circuit Serial Programming™ (via two pins)
• Programmable code protection
• Brown-out Reset
• Power-on Reset
• Power-up Timer and Oscillator Start-up Timer
• Wide operating voltage range (2.0-5.5V)
• Industrial and extended temperature range
• High-Endurance Flash/EEPROM cell:
- 100,000 write Flash endurance
- 1,000,000 write EEPROM endurance
- 40 year data retention
Low-Power Features:
• Standby Current:
- 100 nA @ 2.0V, typical
• Operating Current:
- 12μA @ 32 kHz, 2.0V, typical
- 120μA @ 1 MHz, 2.0V, typical
• Watchdog Timer Current:
- 1μA @ 2.0V, typical
• Timer1 Oscillator Current:
- 1.2μA @ 32 kHz, 2.0V, typical
• Dual-speed Internal Oscillator:
- Run-time selectable between 4 MHz and
48 kHz
- 4μs wake-up from Sleep, 3.0V, typical
Peripheral Features:
• 16 I/O pins with individual direction control
• High current sink/source for direct LED drive
• Analog comparator module with:
- Two analog comparators
- Programmable on-chip voltage reference
(VREF) module
- Selectable internal or external reference
- Comparator outputs are externally accessible
• Timer0: 8-bit timer/counter with 8-bit
programmable prescaler
• Timer1: 16-bit timer/counter with external crystal/
clock capability
• Timer2: 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
• Capture, Compare, PWM module:
- 16-bit Capture/Compare
- 10-bit PWM
• Addressable Universal Synchronous/Asynchronous
Receiver/Transmitter USART/SCI
Specification :
Packaging | Tube |
Part Status | Active |
Core Processor | PIC |
Core Size | 8-Bit |
Speed | 20MHz |
Connectivity | UART/USART |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
Number of I/O | 16 |
Program Memory Size | 3.5KB (2K x 14) |
Program Memory Type | FLASH |
EEPROM Size | 128 x 8 |
RAM Size | 224 x 8 |
Voltage - Supply (Vcc/Vdd) | 3 V ~ 5.5 V |
Data Converters | - |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 85°C (TA) |
Package / Case | 18-SOIC (0.295", 7.50mm Width) |
Supplier Device Package | 18-SOIC |
Product drawing:
Product show:
Our advantage :
be sure to meet your need for all kinds of components. ^_^
Product List
Supply a Series of Electronic Components, full range of
semiconductors, active & passive Components.We can help you to
get all for bom of the PCB,IN a word, you can get one-stop solution
here,
The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor,
Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer,
Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal
& Oscillator, Inductor, Sensor, Transformer, IGBT Driver,
LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)
Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond,
Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc
TOP Electronic Industry Co., Ltd.
Thank you for your time to know our company and lean our production.
TOP Electronic Industry co., Ltd was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.
Here we can offer one-stop solution service: from PCB design, production to PCB assembly, from a series of components offer to the BOM list.
In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate inventory, fast delivery, be praised by all the customers .
As an innovative company, TOP supplies and markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability, accessibility are all important to us.
The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.
Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc
As a global distributor of electronic components, we stocking the world's widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material) purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.
With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.
TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.
As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.
You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!