
No. | Item | General Parameter | Remark |
1 | Rated Capacity | 20Ah | Standard discharge(0.2 C5)after standard charge(0.2 C5) |
2 | Minimal Rated Capacity | 18Ah | |
3 | Nominal Voltage | 48V | 16S |
4 | Cycle Life | Higher than 60% of the Initial Capacity of the Cells | ◆Charge: CC@0.2C to 58.4V, then CV till current to 0.05C ◆Rest: 30min. |
5 | Discharge cut-off voltage | 36.8V | 36.8V( recommended) |
6 | Charging cut-off voltage | 58.4V | 58.4V (recommended) |
7 | Cell and assembly method | IFR26650EC-3.3AH | 16S6P |
8 | Housing material | PVC | |
9 | Standard charge | 0.2C constant current(CC) charge to 58.4V,then constant voltage (CV)58.4V charge till charge current decline to ≤0.05C | Charge time : Approx 7h |
10 | Standard discharge | Constant current 0.2C Cut-off voltage 36.8V | |
11 | Maximum Charge Current | 15A | |
12 | Max Discharge Current | 40A | |
13 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. |
Discharge: -10~60℃ | |||
14 | Storage Temperature Range | Less than 1 year : 0~25℃ | 60±25%R.H. at the shipment state |
Less than 3 months:-5~36.8℃ | |||
15 | Weight | Approx: 8.8Kg | |
16 | Max. Dimension | Height:280mm | |
Width: 164mm | |||
Length: 130mm |
Safety Performance for Single Cell
Tac single cell passed the UN38.3 Certification to keep the safe performance of battery pack.
No. | Items | Test Method and Condition | Criteria |
1 | Overcharge (3C/10V) | Charge the cell with current of 3C, till the voltage of the cell reach 10V and current reduce to 0A. Monitor the variation of the cell’s temperature in the process of the test. Stop the test when the temperature of the cell falls to value 10ºC lower than the peak value. | No explosion No fire |
2 | Over Discharge | Charge: 1C CC to 3.65V and CV to 0.05C cut off, Discharge the cell with 1C current for 2.5 hours. | No explosion No fire No leakage |
3 | Nail test | Charge: 1C CC to 3.65V, and CV to 0.05C cut off, Standby for 1 hour, then measure OCV, A nail is penetrated vertically through the center of the cell and left for over 1h. The diameter of the nail is 2.5~3.5 mm. | No explosion No fire |
4 | Short test (25°C) | The battery to be fully charged with standard charging condition, and short the positive and negative terminals for 4 hrs with wire resistance = 30mOhm at 25°C. | No explosion No fire |
5 | Short test (55°C) | The battery to be fully charged with standard charging condition, and short the positive and negative terminals for 4 hrs with wire resistance = 30mOhm at 55°C. | No explosion No fire |
6 | Heating test (130°C) | The battery to be fully charged with standard charging condition, and put into the chamber for heating at 130°C / 30mins. | No explosion No fire |
Guang Zhou Sunland New Energy Technology Co., Ltd.
Guangzhou Sunland New Energy Technology Co., Ltd. (Sunland Power) is a senior professional service provider of
battery application. Aiming at serving industrial users, it is
dedicated to providing industrial users with optimized battery
supporting solutions and safe, environmental friendly and
cost-effective battery products.
It has a R & D, engineering and management team with more than
10 years of industry experience
From upstream to downstream, the battery industry has the advantage
of vertical integration
Specializing in batteries, battery packs, battery management
systems and energy solutions
The products are widely used in medical devices, coal mine
security, electronic appliances, power supply and standby energy
storage system. For example, the power supply system of electric
bicycle; Solar energy storage power supply system, UPS backup power
supply system. At the same time, it is also an ideal choice for
vehicle starting power supply, military painting and other fields.
We provide professional design and customization services according
to the special needs of customers.