Product Details
48V 200Ah Lithium Iron Battery Pack High Capacity lithium iron
phosphate battery pack
Product specification
48V200Ah Wall-mounted Battery pack with RS232+ dual RS485 and CAN,
120A overcurrent protection plate.
The BMS system has the following features:
With 120A continuous overcurrent capacity, with communication
functions (RS232 and dual RS485 communication) and CAN, over charge protection, over
discharge protection, over current protection, short circuit protection, balancing function, alarm
function.
General technical parameters of battery pack:
No. | Item | General Parameter | Remark |
1 | Combination method | 15S2P | |
2 | Rated Capacity | Typical | 200Ah | Standard dischargeafterStandard charge(package) |
Minimum | 200Ah |
3 | Nominal Voltage | 48V | Mean Operation Voltage |
4 | Voltage at end ofDischarge | 42V | Discharge Cut-off Voltage |
5 | Charging Voltage | 54.75V | |
6 | Internal lmpedance | ≤80mΩ(The value will beadjusted depend on differentbatteries and
PACKscheme )≤150mΩ | (Measure internalresistance by AC method insemi-electric state) |
7 | Consistency | Charge terminal monomerpressure difference (cellpressure difference
at 3.65V | Recorded the maximumdifferential pressure of3.65V in a single
section ofcharging |
8 | | Discharge terminal monomer pressure difference (2.8V monomer under-voltage protection or total pressure 42V under-voltage protection) ≤250mV | Recorded the instantaneous pressure difference of up to 2.8V in the single section of the discharge |
9 | Standard charge | Constant Current:40AConstant Voltage 54.75V0.02CA cut-off | Charge time:Approx6 h |
10 | Standard discharge | Constant current: 100Aend voltage 42V | 0.5C |
11 | Maximum ContinuousCharge Current | 100A | |
12 | Maximum ContinuousDischarge Current | 120A | |
13 | Operation TemperatureRange | Charge:0~45℃ | 60±25%R.H.Bare Cell |
Discharge:-20~60℃ |
14 | Storage TemperatureRange | Less than 12 months:-20~25℃(小于12月:-20~25℃) | 60±25%R.H.at the shipment state |
less than 3 months:-20~40℃(小于3个月:-20~40℃) |
Less than 7 day:-20~60℃(小于7天:-20~60℃) |
15 | Dimensions( mm) | 590*375*245 | APPROX Externaldimensions of the chassis,without mounting ears
andterminals |
16 | Weight | ≥ 85kg | Subject to actual productweight |
17 | Shipped product charge | 50%-60% battery volumedelivery | |
18 | Package material | Carton + wooden fumigation tray | |
Product usage consideration:
- Do not put the battery in water or wet it.
- It is prohibited to charge and use the battery outside the
temperature range specified by us. Do
- not store, charge and use this product near the source of fire or
heat source.
- When the battery pack smells or leaks,you should immediately stop
using or stop charging, and
- move to open ventilation, away from the source of fire, in time to
get in touch with us.
- Do not connect the positive and negative poles to the opposite side
while the load is in use.
- Do not short-circuit the positive and negative of the battery pack
with a metal conductor.
- Do not put the battery pack into the fire or heat it.
- It is prohibited to dissect the battery pack artificially, to
puncture the battery pack with nails or sharp objects, to knock the
battery pack with hammers or other external forces, and to trample
or drop the battery pack artificially.
- Never put the battery pack into the microwave oven or pressure
vessel.
- If there is any abnormal phenomenon during charging or using,
please stop charging and using immediately.
- Product the best temperature of 25± ℃,if the product is not in this
temperature range during use, the discharge capacity will be
reduced.
- In case of any malfunction or abnormality during use, please
contact us and do not disassemble the battery pack without
permission.
Company Profile
Shenzhen Consnant Technology Co., Ltd.
Shenzhen CONSNANT Technology Co., Ltd. (simple name: CONSNANT) is a
professional manufacturer engaged in research, development and
production of UPS (Uninterruptible Power Supply) including the
Modular UPS, Outdoor & Indoor UPS,Industrial special UPS, Low
Frequency & High Frequency Online UPS and Solar Power System
both for home appliance and telecom equipments.
Our product has obtained the CE, ISO 9001, ISO 14001 and local
Chinese TLC certificates. Having reached good sales results in
China, we are now expanding our sales overseas.
We are proud of the fact that most of our company’s engineering
staff is well-qualified and has gained experience in relevant
fields more than 10 years. In order to protect your equipment from
electrical supply network instability, we offer innovative
solutions that obtain higher availability systems, improve
efficiency and offer flexible solutions to meet specific needs and
range of application. The UPS product is widely used in data and
computing centers, finance institutions, banks, within industry and
medical fields.
We welcome any kind of collaboration, will enjoy any opportunities
of dealing with new costumers: from distributors to ultimate
consumers, undertake both wholesale and retail orders, including
the sale of finished goods or parts.
If you start work with us, you will not only get high-quality
product at reasonable price, but also maintain the profitable
conditions for further years.
We are located in the world-famous High-Tech center – Shenzhen
city, China. Our factory is close to airport. If you are lucky to
visit the city, you are kindly welcomed to visit our factory.





