
wireless Charging Coil Assembly WX5010-6R3K Using for transmitter and receiver module to battery Chargers and Mobile Phone
1. DIMENSIONS(MM)
A(mm) | 50.0+/-1.0 |
B (mm) | 20.5+/-0.5 |
C(mm) | 1.5~3.0 |
C1(mm) | 5.0+/-1.0 |
D(mm) | 5.3+/-0.3 |
E(mm) | 5.0Ref |
F(mm) | 2.7Max |
2. MATERIAL
a, CORE:G50*5.0*1.0
b, WIRE:∮0.08*105P*10.5TS
c, Sn:Sn99.3% Cu:0.7%
d. yellow adhesive:1603
e. doubld faced adhesive tape:49.3*0.06
f. tape maroom:mylar tape 5.0mm width
3. ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
INDUCTANCE(L) | 6.3uH+10% | WK5237 OR EQU | 100KHz/0.25V |
DCR | 60(mΩ)MAX | 502BC | |
Q Value) | 70 Min | WK5237 OR EQU | 100KHz/0.25V |
5. SPECIFICATION NO:
WX 5010 — 6R3 K2 ① ② ③ ④ ①Product symbol: ②Dimmensions: ③Inductance : 2R2:2.2μH, R47:0.47μH,310:31uH,501:500uH,152:1.5mH ④Tolerance: J-±5% K-±10% M-±20% N-±30% P-MIN |
6.TEST DATA:
|
1.STORAGE TEMPERATURE: | -40℃~85℃ |
2.OPERATING TEMPERATURE RANGE : | -40℃~+85℃(CONTAIN HEATING COIL) -40℃~+85℃ |
3.EXTERNAL APPEARANCE : | NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
4. TERMINAL STRENGTH | FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF. |
5.INSULATING RESISTANCE : | THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE. |
6. HUMIDITY TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90~95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH. |
7. VIBRATION TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0% AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10~55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm . |
a. Quantilty b. Packaing Dimensions (mm) Used PE Packaing |
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices
Guangdong Uchi Electronics Co.,Ltd
Uchi was established in 2006 in Dongguan, China.
After years of development, Uchi has become a large scale hi-tech
enterprise that specialized in development and production of
complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL
TYPE),Resistor、integrated circuit 、 Capacitor, surge protector and
protective devices of lightning protection products. It ranks front
in the industry and has heartquarter in Hong Kong. With its
excellent technology and quality products, Uchi has won wide
recognition of overseas customers. Saini Impex PVT.LTD is our
authorized sole distributor in india .
China's leading enterprise of circuit protection components
Our strength :
A large number of product series in our factory have passed the
certification of various international standards
Factory Tour :
Advanced equipment, lean production
Uchi boasts with a production base that covers an area of nearly
15000 square meters.
We successively imported high-tech fully automated production
equipments and high precision testing instruments and have put into
production to realize the automation, large scale and
standardization.
Uchi has a galaxy of hi-tech talent teams headed up by national
class experts to engage in the work of product development, product
quality control, sales andservice technical support, etc., and has
successively obtained tens of certificates of appearance patents,
utility patents and inventions.
To guarantee the quality, we successfully passed the certification
of ISO9001:2008 quality management system, scientific and efficient
managing mode to carry out lean production and form scientific and
efficient quality control system. The products are certified with
UL, CUL, TUV, VDE, CSA and SGS, RACH 73 environmentally friendly
testing certifications.
Exquisite quality at customers' favor
Uchi is an export membership of Alibaba with free import and export rights. It is appraised as Guangdong Famous Star Enterprise and Dongguan Private Enterprise. Our products have doubled and redoubled to provide more kinds and high quality and reliable products and service. Our products mainly consist of:
Metal Oxide Varistor
DIP Varistor & SMD Varistor
Thermally Protected Varistor
DC-Link Capacitor for New energy vehicles supporting the HEVEV
Automotive Fuse Links for EV Plugin HEV FCEV
PTC Thermistor
NTC Thermistor
PPTC Resettable Fuse
Thermal Fuse
Auto Blade Fuse
Glass Fuses
Metal Film Resistor
Carbon Film Resistor
Cement Resistor
NTC Temperature Sensor
CDS Photoconductive Cell
Our products are widely used in New energy vehicles, home appliance, medical equipment, office equipment, communication
equipment, phone battery, electronic calendar, electronic
thermometer and temperature controller to cover military
telecommunications, IT, automobile and consumer electronic fields.
Cooperation with good faiths to win in the market.
Excellent quality sincere service is the key to the success of
Uchi.
In the future Uchi will still stick to the tenets of "Quality
first, customer foremost." "First class quality, first class
service and customersatisfaction" to manufacture the high quality,
technically advanced and reasonable prices products. We hope to
trigger with global partners the revolution in resistor products.
We cordially welcome friends from home and abroad to visit us for
guidance and cooperation.