
2.8Ah Lithium-ion Battery IP68 LED Miners Headlamp, Coal Mining Lights for Hard Hats with Movable Steel Hook
Characters for miners headlamp
Magnetic USB charger and Charging indication,Movable Steel Hook.
Battery type: 2.8Ah Rechargeable Lithium-ion
High power LED light source, extra long lifetime (50000 hours);
Intelligent charging protection: anti-overcharging, current control, short circuit protection and anti-overheating;
Wateproof grade : IP68,current shock proof, moisture proof and impact proof;
High Quality Material : Germany Bayer PC
Portable Light Weight : 128g , similar to the weight as a cell phone, more portable.
Multi-function lighting modes : main light - auxiliary light
Light Color : White, warm white,red,green,blue and yellow color and RGB available.
GL2.5-A LED Miners Headlamp Specification | ||
Type | Coal Mining Lights | |
Light | Main LED QTY | 1pc |
Auxiliary LED QTY | 6pcs | |
Main light power | 1watt | |
Main light current | 230mA | |
Main light Luminous flux | 110LUM | |
Brightness of the main light (Initial Lighting degree) | 3500LUX | |
Main light Life span | 100000hours | |
Auxiliary light life span | >3000hours | |
Auxiliary light power | 0.4watt | |
Battery | Type | Lithium ion battery |
Quantity | 1 cell | |
Rated capacity | 2.8Ah | |
Rated Voltage | 3.7V | |
Cycles times | 1000 cycles | |
Continuous working time | 13 hours | |
Short circuit protect time | < 320uS | |
Charging time | 3.5h (by charger or USB) | |
Usually Specification | Color | black |
Material | PC | |
Main cable length | NA | |
Dimensions | 62*57*80mm | |
Weight | 128g | |
Water-proof grade | IP68 | |
Certified | CE,ATEX,EXIB II M1 | |
Traditional/ Fast intelligent charger | AC input | 100-240V , 50-60Hz |
DC input | 7-30V | |
DC output voltage | 4.2v +_0.05v | |
DC output current | 1000mA /2000mA | |
AC Plug | US,EU,UK and AU standards all countries | |
Dimensions | 56*76*116mm | |
Weight | 215g |
The miners headlamp pictures
Miners Headlamp Troubles and troubleshootings
Description | Analysis | Troubleshooting |
Light is not bright | Switch contact is bad / Led source is broken | Inspect switch, measure the circuit, If the switch contact is good, then check the voltage of LED and the circuit or contact with the manufacturer. |
Not Light enough time | Undercharge | First check the contact points, and then charge according to the regulation . |
New lamp use without cycle charge before | Precycling charge according to the regulations. | |
The Lifespan of battery is over | Replace the new lamp | |
Illumination is not enough | Low battery voltage | Measure the battery voltage, ensure charging time up to 7hours. |
The glass is serious pollution | Can wash the lens suface of lamp by water . | |
The lamp can't charge or long charging time | Charger (rack) breakdown or battery damages, charge manager fault | Check the charger 's output voltage and current , if all normal, check the battery , measure its internal resistance and capacity. If not up to technical requirements, replace charger or contact with the manufacturer. |
Can't rotate on fixed point | The screws of clip is started | Fasten the screw appropriately |
) In the first time using lamps, pls use our special charger or accorded charging rack to charging lamps firstly.when the lamps are under charging,charger indicated light is RED COLOR,when the charger indicated light turned GREEN COLOR,it means that charger have finished charging.
2) Our GL2.5-C cordless cap lamp has one main light and six auxiliary lights. It has two lighting modes.
When you press the button firstly, the main light is on , press secondly, the lamp is off, press thirdly,
the auxiliary lights is on, press fourthly, the lamp is off. GL2.5-C cordless cap lamp just has one main
light, and has one strong brightness lighting.
Our Advantages:
1. Flexible, can be bent into any shape
2. High quality products, European and US standard
3. 3528 or 5050 SMD LED adopted,high brightness ,stable performance.
4. long lifetime,5% attenuation after 2500 hours,life time is 80000-100000 hours
5. Energy saving and environmental friendly.
6. 5m/rell is the standard package,but the size can be customized
7. Various of LED density optional, e.g.30LEDs/M,60LEDs/M,96LEDs/M. etc.
8. Each unit of 3LEDs can be cut out at regular segments.
9. 3M adhensive attached on the back of PCB,for stick installation.
10. White, warm white,red,green,blue and yellow color and RGB available.
Safety : All our lamps has one year warranty. We will keep free maintenance for you in one year.
Industrial Applications:
Widely used in petrochemical, chemical, nuclear power, military automobile shipbuilding industries, suitable for oil pipelines, cable interlayer, platform channel, pump house , Tunnel Project , Mountian-climbing,hiking, Patrolling, Overhauling and Emergency in electrical power company, Mine , Military, Police, Fire Fighting, Dockyard and other hazardous locations ect...
Suitable for explosive gas environment zone 1, zone 2 locations.
Suitable for combustible dust environment 20 zone, 21 zone and 22 zone places.
Suitable for A, II B, II C explosive gas environment.
Suitable for indoor, outdoor 1.8-3.5 meters in height.
Samples : Small Orders Accepted
Our main market: Australia, India, Canada ,USA,etc...
RFQ
Q: What does IP mean?
A: IP (Ingress Protection) classifies the degrees of protection provided against the intrusion of the bulb. The first clip indicates the bulbs resistance to solid intruders (like dust), and the second cipher indicated the bulbs resistance to water.
Q: What is the distinguishing feature of explosion-proof?
A: Meet GB3836-2000 "explosive gas environment use electrical equipment" stand.
Q: What is the advantage of environmental protection?
A: The LED solid state light source, no lead and mercury, no radiation pollution and recyclable.
Q: What is emergency device?
A: Optional configuration, integration design, safety, long life span, can be removed from the DC power supply system.
Q: What is Lux:
A: LUX is a measurement of, how much luminous flux is spread over a given area.
Q: What is Lumen?
A: Lumen (Lm) is a measure of the total amount power of the light that is emitted at a1 meter radius at a 360 degree angle from a light source.
Q: How to take the samples?
A: More than 30 kinds of different types and sizes coal mining lamp .
We can send samples to you for testing, samples have in stock, can provide to you soon.
We can do the products with your LOGO, language.
Accept ODM, OEM orders, can customized products with client requirements.
GREEN LIGHTING TECHNOLOGY CO.,LTD
GREEN LIGHTING TECHNOLOGY CO.,LTD is an expertised manufacturer of explosion-proof
mining lamps which is located in ShenZhen area in china.Our factory has skilled experience
in underground working lamps development and production. We focus on the development
and innovation, and we pay more attention to great quality. We also have established our
own marketing department for foreign sales.
Our products covers:
miner safety cap lamps, explosion proof flashlights, led high power flahslights, led search light,
led strip light.
With excellent quality and good service, our products have already captured the vast consumer
markets in many countries such as South America, North America, Europe, Australia, South
Africa, Middle East, etc. We have already have more than sixty distributors in forty four cities
over the world. If you want to be our distributor, pls contact with us by email : sales@szglighting.com,
and send your company information to us, we will issue the detailed distributor contract to you
as your market. Look forward to establish cooperation with you !
Our advantage:
We assume to offer most competitive price with good quality and punctual delivery to satisfy
our valued customers. Reasonable price, reputation innovation, high-quality service, strict
quality control processing make us approved by global customers.
Why choose GREEN LIGTING ?
About us
Our mission:To lead a new era.
Our vision:To create a world famous brand, to disseminate the Chinese culture.
Our slogan:To grow together! To achieve success together
Top quality material
1) CREE led: advanced cree led
2) Germany Bayer PC material make the lamps durable, feels good
3) Panasonic or ATL battery: imported from Japan, it is applied in Apple notebook
Advanced equipment
1) SMT: Surface Mounted Technology, Wave Soldering
2) Smart Oscilloscopes: imported from USA, USD50,000, it is usually used in Academy
3) Battery Cycle Tester: 10 times of cycly test for 80 hours
4) CNC (Computer Numerical Control) and Injection machine: imported from Taiwan
Warranty and after-sales service
1) Warranty: 2 years, for defective one, we will replace a total new cap lamp during warranty time
2) After sales service: will deal with your complaint at first time, give you solution within 5 working days
3) Free samples: free samples will be provided when our new models come out
4) Market support: we can support you to do advertisment in local magazine and provide samples with
big discount for exhibition
R & D
1) We have built a team of 10 qulified engineers to get all the certificates in the world
2) Every year we invest 10% annual turnover in our R&D