China Categories
All Categories
4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C
Ask Latest Price
Brand Name:TAC BATTERY
Model Number:13200MAH 3.7V
Certification:ROHS \ CE
Price:USD 23
Supply Ability:100000 per month
Delivery Time:20-30 days for pack
Company Data
Verified Supplier
Contact Person
Alice
Business Type:
Manufacturer Importer Exporter
Officials:
No.27 BOWANG Street ,Nan Cun Town, Panyu, Guangzhou, GD,China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C
Base information
| item | data | remark |
| 1 | 16000mah | standard capacity |
| 2 | 15500mah | Min capacity |
| 3 | 3.7v | voltage |
| 4 | 4.2±0.03V | 100% full charge |
| 5 | 0.5c | charge current |
| 6 | 0.5c | dishcharge current |
| 7 | 5 pin molex 51146. | connector |
| 8 | peak current | 2A |
| 9 | continue current | 1.5A |
Other specification for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C
Number | Item | General data | Remark | |
| 1 | Internal Impedance | ≤80mΩ | The measure must uses the new batteries that within one week after shipment and cycles less than 5 times test by internal resistance measured at AC 1KHZ after 50% charge | |
| 2 | Standard charge | Constant Current 0.5C5A Constant Voltage 4.2V 0.01 C5A cut-off | Charge time about 4.0h | |
| 3 | Standard discharge | Constant current 0.2 C5A end voltage 3.0V | ||
| 4 | Fast charge ( | Constant Current 1C5A Constant Voltage 4.2V 0.01 C5A cut-off | Charge time about 2.5h | |
Initial Performance Test For Cell
Item | Test Method and Condition | Requirements |
Open-Circuit Voltage | The open-circuit voltage shall be measured within 24 hours after standard charge. | ≥4.08V |
Internal impedance | Internal resistance measured at AC 1KHz after 50% charge. | ≤80mΩ |
Minimal Rated Capacity | The capacity on 0.2C5A discharge till the voltage tapered to 3.0V shall be measured after rested for 30min then finish standard charge. | Discharge Capacity ≥4000mAh |
Mechanical characteristics and Safety Test witl UN38.3 Standard
1 / Vibration Test :
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz, the excursion of the vibration is 1.6mm. The cell shall be vibrated for 30 minutes per axis of XYZ axes.
pass standard: No explosion,No fire
2 / Drop Test
The cell is to be dropped from a height of 1 meter twice onto concrete ground.
pass standard: No explosion,No fire
3 / Crush Test
Fresh,Fully charged
Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.
pass standard: No explosion,No fire
4 / Short Circuit Test (20±2℃ ).
samples require: Fresh,Fully charged
Each test sample battery, in turn, is to be short-
circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ).
pass standard: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃
5 / Short Circuit(60±2℃ ) test
samples require: Fresh, Fully charged
Each test sample battery, in turn, is to be short-
circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ).
pass standard: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃
6 / Impact test
samples require: Fresh,Fully charged
A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample.
pass standard:No explosion, No fire
7 / Forced Discharge test
samples require: Fresh,Fully charged
Discharge at a current of 1 C5A for 2.5h.
pass standard:No explosion, No fire
8 / Nail Pricking test
samples require: Fresh,Fully charged
Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.
pass standard:No explosion, No fire
Drawing for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C
T | Max.08.0 | W | 50.5+0.5 –0.5 | H | 110+0.5 –0.5 | UNIT | mm |
Product Photos
Company Profile
Guang Zhou Sunland New Energy Technology Co., Ltd.
Guangzhou Sunland New Energy Technology Co., Ltd. (Sunland Power) is a senior professional service provider of
battery application. Aiming at serving industrial users, it is
dedicated to providing industrial users with optimized battery
supporting solutions and safe, environmental friendly and
cost-effective battery products.
It has a R & D, engineering and management team with more than
10 years of industry experience
From upstream to downstream, the battery industry has the advantage
of vertical integration
Specializing in batteries, battery packs, battery management
systems and energy solutions
The products are widely used in medical devices, coal mine
security, electronic appliances, power supply and standby energy
storage system. For example, the power supply system of electric
bicycle; Solar energy storage power supply system, UPS backup power
supply system. At the same time, it is also an ideal choice for
vehicle starting power supply, military painting and other fields.
We provide professional design and customization services according
to the special needs of customers.
Send your message to this supplier
You May Like
Lithium Polymer Cell GSP555376 3.7V 2300mAh Batteries for Toy
Lipo Battery Rechargeable LP052030 3.7V 200mAh Polymer Lithium For Bluetooth
Polymer Lithium Ion Batteries LP052030 3.7V 260mAh for Toy
Lipo Battery LP073048 3.7V 800mAh Polymer Lithium Ion For Electrial Production
Lithium Polymer Battery Pack LP403759 3.7v 900mah for Table PC
GSP035080 3.7V 1300mAh Polymer Lithium Ion Battery for Mobile phone, notebook PC
GSP041235 3.7V 120mAh Polymer Lithium Ion Battery for PDA MP3 MP4 smart card
Polymer Lithium Ion Batteries for Vidicon Camera GSP053040 3.7V 580mAh
GSP055070 3.7V 1800mAh Polymer Lithium Ion Batteries With PCB
GSP063465 3.7V 1300mAh Polymer Lithium Ion Battery cells with high capacity
Polymer Lithium Ion Battery Cell with PCB For HEV GSP351624 3.7V 100mAh
Inquiry Cart
0