China Categories
All Categories
Iron Case Lithium Portable Camping Battery 12V 125Ah High Energy Density
Ask Latest Price
Brand Name:Topband
Model Number:TB12125F-T208A
Certification:MSDS
Price:Negotiable
Payment Terms:L/C, T/T
Supply Ability:450Mwh/year
Delivery Time:2~4weeks for samples; 4~6weeks for mass production
Company Data
Active Member
Contact Person
Jerry Yang
Business Type:
86-755-27651888-3215
Business Type:
Manufacturer Exporter
Officials:
Topband Industry Park,Tangtou Town,Bao'an District,Sheznzhen,China
Quality:
Quality Certifitation Available
Product Details
Company Profile
Product Details
Iron Case Lithium Portable Camping Battery 12V 125Ah High Energy
Density
1. LiFePO4 Battery advantage
- long life & deep cycle( over 2000cycles @ 100%DOD)
- with built-in PCM/BMS protection
- super quick charge/discharge performance
- safe pressure valve design ( no explosion, no fire)
- high energy density
- low self-discharge( <3% per month,<15% per year)
- 1/3 weight & 1/2 volume of lead acid battery
- eco-friendly
- high consistency
- no memory effect
- easily replace lead acid battery
This specification applies to the TB12125F-T208A battery manufactured by SHENZHEN TOPBAND CO.,LTD,Describes the type and size,performance,technical characteristics,warning and caution of the rechargeable cell.
1. Battery Pack Brief Introduction
1．1 Battery Type
LiFePO4 (LFP)
1. 2 Reference Standard
1．3 Product SPEC
12V/125Ah 4S5P
1．4 Cell Brand and Model
TB027070180C-Fe-25Ah
1．5 Period of Warranty
24 Months from the date of shipment
1．6 Battery Specification Amendment
If the raw materials, production processing, production system or battery usage environments & other conditions need to be change, the amendment side needs provide the written advice to the other side, only the both sides come to an end, the amendment will be effective
2． Battery Pack Basic Features
| NO. | Items | Characteristics | Testing Methods | |
| 1 | Nominal Voltage | 12.8V | Follow | |
| 2 | Nominal Capacity | 125Ah | Follow | |
| 3 | Minimum Capacity | 118.75Ah | Follow | |
| 4 | Battery internal Impedance | Internal Impedance≤50mΩ, | Internal Impedance Testing Machine(1kHz ) | |
| 5 | Shipment Voltage | 12.8～13.6V | Multi-meter | |
| 6 | Dimension | Length | See attached size chart | Venire caliper |
| Width | ||||
| Height | ||||
| gross weight | Approx:15.8kg | electronic scale | ||
| 7 | Working Temperature | Charge | 0~45℃, 45~85%RH | Temperature & Humidity Instruments |
| Discharge | -20~55℃,45~85%RH | |||
| 8 | Storage Temperature & Humidity Range | Short: above one month | -20~+55℃,45~85%RH | Temperature & Humidity Instruments |
| Medium: above three months | 0~+45℃,45~85%RH | |||
| Long:above one year | +5~+30℃,45~85%RH | |||
| 9 | Allowed maximum continuous charge current | 5A/each charger port | ||
| 10 | Allowed maximum continuous discharge current | 100A | Multi-meter | |
| 11 | Allowed maximum reverse charge voltage | NO Allowed | / | |
| 12 | Allowed maximum charge voltage | 14.6±0.1V | Multi-meter | |
| 13 | Discharge cut-off voltage | 10±0.1V | Multi-mete | |
3. Battery Pack Electrical Characteristics
3.1 Testing Conditions (Unless Specially Requirements)
Temperature:20±5℃ Related Humidity: 45~75%
Atmosphere Pressure: 86~106kPa
The testing items under the Shipment Voltage(12.8-13.6V )
3.2 Battery Pack Electrical Characteristics
| No. | Items | Standards | Testing Methods |
| 1 | Internal Impedance | Impedance ≤50mΩ | Under 20±5℃ Environment Temperature , the Usage Frequency of Fully Charge( 1KHz) , Use AC Internal Impedance test machine to test |
| 2 | Nominal Capacity | 125Ah | Rest for 0.5~1 hour after fully charge, Using electrical loader to connect with the battery output port, and discharge with constant current 0.2C till it can’t discharge. Do the cycle three times, if there is one time that the discharge time is equal or more than 285minute , you can stop. |
| 3 | Short circuit protection | No load ability after short-circuit .comeback capability of loading after remove the lead away, | Short the pack with the lead (<50mΩ). If remove the lead away, connect the electronic loader with P+, P- of protection board again, so load ability comes back. |
| 4 | Allowed Maximum continuous charge Current | 5A/each charger port | charging with 0.2C for more than 0.5h and the added temperature of battery pack less than 20℃. |
| 5 | Allowed Maximum continuous discharge Current | 100A | Discharging with 0.2C for more than 0.5h and the added temperature of battery pack less than 20℃. |
| 6 | Over Current Protection | 300A～500A | Using electron load connect with output side, discharge with 70A for about 2sec Discharge with 90A for less than 20 millisecond, | |||
| 7 | the delay time of over current protection | 10-50ms | Using electron load connect with output side, discharge with more than 500A and record the voltage wave of output side with oscillograph . Numerating the time of voltage from wave to zero for voltage | |||
| 7 | cycle life | Discharge Capacity ≥80% | Discharge it with the current of 0.2C to the cut-off voltage, and store it for 15min.Charge a battery with the current of 0.2C, then keep the voltage and current constant and continue to charge it until completed . After storing the battery for 15min. The test is to be conducted as per the above cycles. The cycle should be 1000 times. At the 1001 times discharge capacity should not be less than ≥80% with 0.2C. | |||
| 8 | Discharge Temperature Characteristics | The ratio between discharge capacity and charge capacity should be not less than the following value | At 20±5℃ discharge the battery with the current of 0.2C to the cut-off voltage and record charge capacity. Store the battery at the following temperature for 2h and discharge the battery with 0.2C to the cut-off voltage. | |||
| Discharge Current | Discharge Temperature | |||||
| -20℃ | 0℃ | 25℃ | 55℃ | |||
| 0.2C | 60% | 80% | 100% | 95% | ||
| 9 | Charge Retention | remain capacity≥90% | At 20±5℃ completely charge and store it for 28 days,and then discharge it with 0.2C to the cut-off voltage. (We suggest charge the battery to 12.8-13.6V every three months) | |||
| 10 | Over Discharge Protection furbish | Charging With 0.2C | Charge the battery with 0.2C for 5min and measure the output voltage (≥10V)of the battery pack. The battery should have load . | |||
4. Battery Pack Reliability Test
4.1 Testing condition (Unless Special Requirements)
Temperature:20±5℃ Relative Humidity: 45~75%
Atmosphere Pressure: 86~106kPa
All testing under full capacity(13.2-13.6V)
4.2 Reliability Test
| No. | Items | Standards | Testing Methods | |
| 1 | Vibration Testing | The appearance of battery should not leakage, break or explosion | Fix a charged battery on a vibrating table, vibrate it for 90 minutes in three mutually perpendicular directions at the 0.8mm resonance. The frequency is to be varied at the rate of 1hz/min between 10 and 55 hertz. | |
| 2 | High Temperature Discharge Testing | The battery should be no remarkable breakage, distortion. Discharge time should not less than 255mins | Place a full charged battery under the environments of 55℃ for 2 hours. Discharge it at the current of 200mA to the cut-off voltage. Then keep it at 20℃±5℃ for 2 hours. | |
| 3 | Low Temperature Discharge Testing | The battery should be no remarkable breakage, distortion. Discharge time should not less than 180 minute | Place a full charged battery under the environments of -20℃ for 15-24 hours. Discharge it at the current of 200mA to the cut-off voltage. Then keep it at 20℃±5℃ for 2 hours. | |
| 4 | Constant Humidity & Temperature Testing | The battery should be no remarkable breakage, distortion. Discharge time should not less than180mins | Place a full charged battery under the environments of 40℃ and 90% - 95%RH for 48 hours. And keep it in the room temperature for 2 hours. Then discharge it at the current of 200mA to the cut-off voltage. | |
| 5 | High & Low Temperature Storage | The battery should be no remarkable breakage, distortion. And charge/discharge normally | Place a full charged battery in a oven with 55±2℃ for2 hours, then keep it under 20±5℃ for 4hrs, then place it in a oven with -20±2℃ for 2 hours, then keep for 4 hours under 20±5℃, cycle as high temperature-normal temperature-low temperature-normal temperature-high temperature for 10 | |
5. BATTERY PACK SAFETY TEST
5.1 Testing condition (Unless Special Requirements)
Temperature:20±5℃ Relative Humidity: 45~75%
Atmosphere Pressure: 86~106kPa
All testing under full capacity(13.2-13.6V)
5.2 Battery Pack Safety Test
| No. | Items | Standards | Testing Methods |
| 1 | Short-Circuit | The battery should be no remarkable breakage, distortion. And charge normally. | Use a resistor with less than 0.05Ω to make the battery short circuit for 1 hour. The appearance and characteristics are normal. |
| 2 | Over Discharge Protection Test | The battery should be no remarkable breakage, distortion. Appearance and charge are normal. | Discharge the battery at the rate of 0.2C with the load of 30Ω for 24h . Charging for 10sec with specified adapter , and check the voltage(≥8.0V) |
| 3 | Impact Test | The battery should be no explosion or catch fire | Place a full charged battery on a flat and put a stainless steel stick (Diamond 7.9mm) in the middle of the battery upright . Beat the steel stick with 9.1Kg |
6. Pack Diagram
Company Profile
Shenzhen Topband Battery Co., Ltd
Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007.
After years of rapid development, now Topband takes lithium battery as the core technology and has become one of the leading suppliers of lithium battery solutions in China, focusing on nano lithium iron phosphate/ LiFePO4 technology for EV, RV/ caravan, marine, motorcycle, golf cart / trolly, UPS, solar storage, medical, floor scrubber, industrial, commercial use, etc.
Smart Bluetooth & WIFI connection is is our patent
feature, equipped with IOS & Android app to
monitor the instant battery status (SOC, OCV, charge
current, ambient temperature, and errors included).
Topband has more than 5000 staffs, covers an area of 100,000 square meters. And large production plants are mainly located at Shenzhen and Huizhou
Our R&D team of over 300 professionals, in cooperation with Tsinghua Research Institute and Harbin Industrial University have laid a firm foundation of our leading technology.
We have got the certificates of ISO9001, ISO14001, OHSAS18001, TS16949 and UL, CE, CB, UN38.3, TUV, etc.
Topband is a Hi-tech enterprise. Since the company established, with innovation, we have committed ourselves to making people’s lives more comfortable and high-efficient. We and our companions are working hard at making technology progress to let people enjoy the changes of new technology.
Send your message to this supplier
You May Like
500W Portable Camping Battery Power Source Lithium Battery Inverter BMS All in One
Quiet Portable Camping Battery Pack Lithium Based Energy Storage System
300Watt Battery Backup Rechargeable Portable Power Pack for Camping
TFT LCD Display Portable Battery Power Supply Camping 1500 Watt With Cooling Fan
1500W Battery Backup Power Supply , Smart Power Bank Lithium Ion Battery Portable
Solar Charge Portable Camping Battery 500W Power Pure Sine Wave 12V Air Cooling
Outdoor Camping Battery Power Supply , Portable Rechargeable Power Supply
Metal Case Rechargeable Portable Camping Battery Deep Cycle 185*140*80mm
Lithium Portable Camping Battery No Memory Effect TB-BL1220F-S115D
Multi Function Portable Battery Power Supply Camping 36 Volt 12AH
2000 Cycles Life Portable Camping Battery OEM / ODM Available
Inquiry Cart
0