China Categories
All Categories
24V / 36V / 48V Battery Backup Module , Battery Pack Module LiFePO4
Ask Latest Price
Brand Name:Topband
Model Number:TB-lithium battery module
Certification:ISO9001/ISO14001
Supply Ability:450Mwh/year
Delivery Time:2~4weeks for samples; 4~6weeks for mass production
Price:Negotiable
Payment Terms:L/C, T/T
Company Data
Active Member
Contact Person
Jerry Yang
Business Type:
86-755-27651888-3215
Business Type:
Manufacturer Exporter
Officials:
Topband Industry Park,Tangtou Town,Bao'an District,Sheznzhen,China
Quality:
Quality Certifitation Available
Product Details
Company Profile
Product Details
24V / 36V / 48V Battery Backup Module , Battery Pack Module LiFePO4
1. Lithium battery module advantage
A. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
B. Long life-cycle: Can be circularly used, best can up to 2000 times recycles, 8 times of Lead acid battery.
C. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
D. Good performance at high temperature and high temperature resistance
E. Low self-discharge rate, less than 3% monthly.
F. No memory effects and highly efficient charge.
G. Environment friendly: Clean and Green energy poses no pollution on our environment.
2. Lithium battery module can be assembled with various cells,
Available to make all customzied battery pack. Cell's details as below:
| 3.2V Lithium Iron Phosphate Cells | ||||||
| Cell Model | Volt(V) | Capacity(Ah) | Inpendance(mΩ) | Weight(g) | Cycle life | Cycle condition |
| TB-01865135C-12Ah | 3.2V | 12Ah | ≤12 | 310±10 | 2000 cycles | 100% DOD |
| TB-02707145C-20Ah | 3.2V | 20Ah | ≤10 | 525±10 | 2000 cycles | 100% DOD |
| TB-02707145D-20Ah | 3.2V | 20Ah | ≤4 | 525±10 | 2000 cycles | 100% DOD |
| TB-02707180C-25Ah | 3.2V | 25Ah | ≤6 | 650±10 | 2000 cycles | 100% DOD |
| TB-02707180D-25Ah | 3.2V | 25Ah | ≤4 | 650±10 | 2000 cycles | 100% DOD |
| TB-02707180C-27Ah | 3.2V | 27Ah | ≤4 | 660±10 | 2000 cycles | 100% DOD |
3. Electrical Characteristics
| item | Criteria | Test method |
3.1 High Temperature Discharge Performance | Capacity retention at 55℃ :≥95% | A cell is charged in accordance with 3.2, and stored in high temperature chamber at 55℃for 5 h, then discharged to cut-off voltage at a constant current of 1C. After that, fetch out the cell and place it in the ambient temperature of 25℃±5℃ for 4 h, then check its appearance |
3.2 Low Temperature Discharge Performance | Capacity retention at -20℃ :≥70% | A cell is charged in accordance with 3.2, and stored in certain ambient temperature for 24hours,then discharged to cut-off voltage(1.8V) at a constant current of 1C. After that , fetch out the cell and place it in the ambient temperature of 25℃±5℃for 4hours. |
3.3 Rate Charge Performance in Normal Temperature | 2C charge capacity≥80% | Under the ambient temperature of 25℃±5℃, a, 1C constant discharge till the cut-off voltage, standby for 1h; b, charge at 2C current till 3.65V, standby for 1h; c, constant discharge with 1C current till 2.0V. |
3.4 Rate Discharge Performance in Normal Temperature | 3C discharge capacity≥95% | A cell is charged in accordance with 3.2, then discharged to cut-off voltage at certain current in an ambient temperature of 25℃±5℃. |
3.5 Cycle Life (25℃±5℃) | ≥2000cycles | A cell is 1C CC/CV 3.65V fully charged, after that stored for 30min;Subsequently, the cell is discharged to cut-off voltage at a constant current of 1C, and stored 30min prior to next charge-discharge cycle, until the capacity retention＜80%, and record all the cycles |
4. Safety Test
| No. | Item | Test Method | Criteria |
| 4.1 | Short- circuit Test | A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h. | No fire, no explosion |
| 4.2 | Overcharge Test | A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h. | No fire, no explosion |
| 4.3 | Over discharge test | A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h. | No fire, no explosion, no leakage |
| 4.4 | Crush Test | A cell is tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h. | No fire, no explosion |
| 4.5 | Impact Test | A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed. | No fire, no explosion |
| 4.6 | Stick Test | a) A cell is tested in accordance with 3.2 b) use φ5mm～φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell; | No fire, no explosion |
| 4.7 | Heating Test(130℃) | A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min. | No fire, no explosion |
5. Our Service
- Customized is allowed;
- Support imprint your logo on products;
- OEM
- Products have proceeded comprehensive testing before shipment
6. Lithium battery module solution
Company Profile
Shenzhen Topband Battery Co., Ltd
Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007.
After years of rapid development, now Topband takes lithium battery as the core technology and has become one of the leading suppliers of lithium battery solutions in China, focusing on nano lithium iron phosphate/ LiFePO4 technology for EV, RV/ caravan, marine, motorcycle, golf cart / trolly, UPS, solar storage, medical, floor scrubber, industrial, commercial use, etc.
Smart Bluetooth & WIFI connection is is our patent
feature, equipped with IOS & Android app to
monitor the instant battery status (SOC, OCV, charge
current, ambient temperature, and errors included).
Topband has more than 5000 staffs, covers an area of 100,000 square meters. And large production plants are mainly located at Shenzhen and Huizhou
Our R&D team of over 300 professionals, in cooperation with Tsinghua Research Institute and Harbin Industrial University have laid a firm foundation of our leading technology.
We have got the certificates of ISO9001, ISO14001, OHSAS18001, TS16949 and UL, CE, CB, UN38.3, TUV, etc.
Topband is a Hi-tech enterprise. Since the company established, with innovation, we have committed ourselves to making people’s lives more comfortable and high-efficient. We and our companions are working hard at making technology progress to let people enjoy the changes of new technology.
Send your message to this supplier
You May Like
Customized Lithium Battery Module , Battery Backup Module Flexible Assembly
12V Rechargeable Lithium Battery Module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah / 300Ah
Lithium Rechargeable Battery Pack With ISO9001 / ISO14001 Certificate
12V Lithium Battery Module For UPS / RV / Solar Energy / LED Light
Low Self Discharge Lithium Battery Module OEM / ODM Available
Light Weight Ups Battery Pack , Lifepo4 Ev Battery Pack 12Ah / 20Ah / 25Ah / 27Ah
High Output Lithium Prismatic Battery , Deep Cycle Marine Battery
3.2V Deep Cycle Lithium Battery Module LiFePO4 2000 Times Cycle Life
Safety Lithium Ion Battery Module With Prismatic ABS / Metal Case
No Memory Effect 48V Lithium Battery Module For UPS / Energy Storage
Customized Rechargeable Lithium Battery Module With BMS Protection
Inquiry Cart
0